Just like welding, cutting is also an important process in heavy duty industries. Cutting is an important procedure as the accuracy and the clean finish is important for any process. When a metal piece of solid thinness is cut, the cutter must make sure that the machine used to cut is as efficient to make a clear cut without any chip or cracked finish. Same ways metals sheets of thinner thickness must be handled carefully. Therefore the importance of a proper cutting machine is equally significant just like a welding machine. Among the other cutting machines, Oxy Fuel Cutting Machines are one of the latest, and let’s see about them in brief in this article.
Oxy fuel cutting is one such procedure which makes use of pure oxygen for the purpose of cutting metal sheets like that of steel. The point behind the procedure is the oxygen that reacts with the steel; this is where the reaction happens which gives rise to iron oxide. The combustion process happens with the help of fire, which actually heats the steel to a high temperature, which is calculated to be just about 1800 F. The 1800 F is the temperature at which the pure form of oxygen used in the Oxy Fuel Cutting machine is made to flow in a steady stream and this reaction is the one that creates the perfect cut.
Oxy Fuel Machines are nothing but metal cutting machines that work according to the above procedure by having oxygen as their fuel. The important point to note down in this method is that. These machines take help of the high-velocity, high-temperature that the oxygen gas gives when heated. The cut is actually made because of the ionized oxygen gas which falls out of the nozzle of the welding machine at a very high velocity. The velocity of the ionized gas is the force that is behind the necessary heat that is provided to melt down the metal sheet. The perfection of any cuts made out of this Oxy Fuel Machines is too high and is the main reasons why technicians prefer these machines for cutting steel metal sheets.
It is not that we have just one single model of Oxy Fuel Machines in the market. There are several kinds of Oxy Fuel flame Machines that are available in the market these days and each has their own specialties. Portable cutting equipment or plasma cutters, shape cutting machines and profile cutting machines are some of the Oxy Fuel flame Machine. If you were thinking that the Oxy Fuel flame Machine are fit only for cutting steel, then you are wrong, you can even cute electrically conductive metals such as aluminium and brass with the help of these machines. As the perfection of these oxy fuel machines is higher they are widely available as shape cutting machines. These shape cutter machines are in general used for the purpose of cutting metals into varied shapes as we desire like circular, flanges, squares, rectangles, straight line and much more.